> Products > Flat-bed lathes > GLX series

GLURUTZPE GLX models combine inverted “V” guide technology in a single machine with the traditional sliding configuration.

The machine has 4+1 guides in two separate areas, one for the tool carriage and another for the tailstock centre and steady rests. Thus, the machine is capable of machining the piece in a single set up, allowing the tool to cross the steady rest without stopping work. All this results in a considerable saving in additional commissionings and cycle times.

Main characteristics:

  • Reduction in commissioning operations. High productivity.
  • High precision and durability.
  • Optimum chip evacuation.
  • Very good ergonomics and access for the operator.
  • Optional integral enclosure. Greater protection and cleaning.
  • Multiprocess lathe with milling, grinding, drilling, boring capacity…
  • Integrated measurement (optional).


Technical data

GLX 13 GLX 16 GLX20
Machining area Swing over bed Sob mm ∅ 1300 ∅ 1600 ∅ 2000
Swing over carriage Soc mm ∅ 1000 ∅ 1300 ∅ 1700
Distance between points Lbc m ≤ 15 ≤ 15 ≤ 20
Head Motor power S1/S6 Pm kW 28/34 [39/48] 39/48 [51/65] 71/88 [92/114]
Motor torque S1/S6 Tm kNm 5,3/6,5 [7,4/9,2] 11,2/13,7 [13,8/17,6] 24,4/30,2 [31,2/38,7]
Range of speeds ns rpm 0÷1000* 0÷800* 0÷500*
Chuck adaptation DIN 55026 A11 A15 A20
Spindle bore ∅ ∅sb mm Ø110 [Ø360] Ø110 [Ø550] Ø110
Tailstock centre Part weight e.p. Wbc t ≤12 ≤18 ≤25

* Peak speed for 10 minutes. Maximum speed in continuous, 60% of peak speed. For other possibilities, please ask.

Photos

 

Videos