GLURUTZPE GLX models combine inverted “V” guide technology in a single machine with the traditional sliding configuration.
The machine has 4+1 guides in two separate areas, one for the tool carriage and another for the tailstock centre and steady rests. Thus, the machine is capable of machining the piece in a single set up, allowing the tool to cross the steady rest without stopping work. All this results in a considerable saving in additional commissionings and cycle times.
|GLX 13||GLX 16||GLX20|
|Machining area||Swing over bed||Sob||mm||∅ 1300||∅ 1600||∅ 2000|
|Swing over carriage||Soc||mm||∅ 1000||∅ 1300||∅ 1700|
|Distance between points||Lbc||m||≤ 15||≤ 15||≤ 20|
|Head||Motor power S1/S6||Pm||kW||28/34 [39/48]||39/48 [51/65]||71/88 [92/114]|
|Motor torque S1/S6||Tm||kNm||5,3/6,5 [7,4/9,2]||11,2/13,7 [13,8/17,6]||24,4/30,2 [31,2/38,7]|
|Range of speeds||ns||rpm||0÷1000*||0÷800*||0÷500*|
|Chuck adaptation DIN 55026||A11||A15||A20|
|Spindle bore ∅||∅sb||mm||Ø110 [Ø360]||Ø110 [Ø550]||Ø110|
|Tailstock centre||Part weight e.p.||Wbc||t||≤12||≤18||≤25|
* Peak speed for 10 minutes. Maximum speed in continuous, 60% of peak speed. For other possibilities, please ask.